QUAD series
Stainless steel self-priming pump for high flow rates
The QUAD series pumps have the following features:
Their resistance to chemical aggressiveness makes them suitable for the chemical, pharmaceutical and textile industries, their capacity to pump dirty liquids makes them suitable for the treatment of waters in general and of industrial waste, while their versatility suits the wine and food industry.
On request, pumps can be supplied on a stainless steel carriage fitted with a switch.
The pumps can also be supplied with DIN 11851, Garolla or Macon fittings.
Stainless steel self-priming pump for high flow rates

Flow rate up to 750 lt/min
Head up to 25 mt
Operating temperature max 110°C
Operating pressure max 4 bar
Motors from 4 HP to 7.5 HP - 2800 RPM
Entirely made of AISI 304/316 high thickness stainless steel
Suitable for aggressive liquids with suspended solids

Self-priming pump
Self-priming pump able to handle liquids with dissolved gases and to operate at a depth of up to 5 metresOpen-type impeller
The open-type impeller is entirely made of stainless steel and is suitable for handling dirty, solid-laden liquidsSmall size
The QUAD pump is very compact and, on request, can be supplied with a practical stainless steel carriage for easy transportation
High thickness pump casing
High thickness steel (3mm) which ensures a higher mechanical and corrosion resistance, and therefore a longer lifeFlammable liquids
For handling flammable liquids, explosion proof motors compliant with Atex standards are suppliedEasy to dismantle
The cleaning and replacement of the mechanical seal and of the impeller are incredibly simple as the pump can be taken apart with easeMaximum hygiene
The pump casing is internally and externally polished to ensure the highest level of hygiene. In addition, the internal surfaces are smooth and with no sharp edges to provide a high hydraulic efficiency

Greater safety
To ensure a greater safety, the pumps with Atex motors are fitted only with motors certified to operate in more hazardous environments (zone 2 category 2G), although the pump is classified for zone 2 category 3G- Priming at a depth of up to 5 m with the pump filled
- Its flow rate makes it suitable for medium/large transfers, whilst keeping a good head
- Open-type stainless steel impeller, making it suitable for handling dirty liquids
- Suitable for handling aggressive liquids
- High thickness steel (3mm) which ensures a higher mechanical and corrosion resistance, and therefore a longer life
- High hydraulic efficiency
- Explosion proof motors can be provided to pump flammable liquids
- Mechanical seal with NBR, FPM or PTFE elastomers
Their resistance to chemical aggressiveness makes them suitable for the chemical, pharmaceutical and textile industries, their capacity to pump dirty liquids makes them suitable for the treatment of waters in general and of industrial waste, while their versatility suits the wine and food industry.
On request, pumps can be supplied on a stainless steel carriage fitted with a switch.
The pumps can also be supplied with DIN 11851, Garolla or Macon fittings.
Technical Specifications
MOD | MOTOR | FLOW RATE [lt/min] ± 5% | Ø PORTS | |||||||
---|---|---|---|---|---|---|---|---|---|---|
HP | RPM | TYPE | 2 mt | 5 mt | 10 mt | 15 mt | 20 mt | 25 mt | ||
QUAD 240 | 4 | 2800 | Three-phase | 399 | 369 | 314 | 253 | 184 | 102 | Ø 2" gas male thread |
QUAD 480 | 5 | 2800 | Three-phase | 748 | 675 | 552 | 429 | 306 | 184 | Ø 2" gas male thread |
7.5 | 2800 | Three-phase | 748 | 675 | 552 | 429 | 306 | 184 |

REF
DESCRIPTION
MATERIALS
1
Casing Delivery Side
AISI 304 or 316 Stainless Steel
2
Outlet Bend
AISI 304 or 316 Stainless Steel
3
Impeller Screw
Stainless Steel
4
Impeller Screw O-Ring
NBR or FPM
5
Impeller
AISI 304 or 316 Stainless Steel
6
Compensation Ring
Steel
7
Seal Rotating Part
Graphite, Stainless Steel, NBR or FPM or PTFE
8
Seal Fixed Part
Ceramic, NBR or FPM or PTFE
9
Body Seal Ring
NBR or FPM
10
Seal Disc
AISI 304 or 316 Stainless Steel
11
Spacing Ring
Stainless Steel
12
Electric Motor
-------
13
Lock Nut
Steel


MOD | MOTOR | Dimensions [mm] | α [deg] |
Ø | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HP | RPM | A | C | D | E | F | G | H | I | L | M | N | O | P | Q | |||
QUAD 240 | 4 | 2800 | 481 | 100 | 98 | 140 | 98 | 145 | 170 | 16 | 104 | 400 | 160 | 200 | 13 | 240 | 45° | 2" |
QUAD 480 | 5 | 2800 | 486 | 100 | 98 | 140 | 98 | 150 | 170 | 16 | 104 | 400 | 160 | 200 | 13 | 240 | 45° | 2" |
7.5 | 2800 | 515 | 100 | 120 | 140 | 110 | 150 | 180 | 18 | 104 | 400 | 185 | 220 | 14 | 240 | 45° |